News

A hydrophilic aluminium fin stock is a special aluminium foil for air conditioning systems. It is made of mill finish aluminium foil by a hydrophilic treatment method. Alloys for the raw material foil include 8011, 1100 and 3102. After a raw aluminum foil roll is degreasing, washed, and dried, it is coated with special coatings on its two surfaces, and …

Our good price 1100 aluminum foil for fin stock is a hydrophilic alu foil with excellent isolating condensation and reflecting heat radiation. The thermal insulation layer protects the inner part of the foil from being corroded. The foil on the air conditioner heat exchanger is mainly used for heat exchange. The hardness of the 1100 foil is reflected by the …

The 8011 aluminum fin stock price fluctuates with many factors, including costs of raw materials, fabrication and shipment. In most cases the cost for raw materials is the key factor, thus experienced purchasers are usually able to guess the price based on the aluminium stock price. However, the other two elements can be of great influence on the price of …

1060 and 1085 heat reflective aluminum sheets represent two levels of solar reflective aluminium sheet in processing methods, reflectivity, mechanical properties and prices. The 1060 heat reflective aluminium sheet is fabricated from 1060 aluminium ingot by continuous rolling. If the rolling machine is not a mirror roller, an extra polishing step must be added. However, polished aluminium sheets perform poorer …

A solar reflective aluminum sheet is a 1050, 1060, 1070, 1085 or 1095 mirror aluminum sheet used for solar reflective panels. The sheet is usually 0.12mm to 2.0mm thick, 20mm to 1300mm wide and less than 1000mm wide. It is applied to a vast scope of fields, such as building decoration, furniture, lighting, cameras, electronic product shells, packaging, traffic vehicles …

Aluminum mirror finish coil for Grille light is of 1050, 1060, 1070, 1085 or 1095 alloy, all of which fall on 1000 series featured by low hardness. This is because the Grille light reflective panels must be light, bright and corrosion resistant, but requires little about hardness, since hardness is not the key factor influencing the service life of grid …

Mirror finish aluminum coils are widely used in solar concentrators, mainly made into the aluminum frame of solar collectors. Alloys for the coil include 1050,1060 and 1070. With the improvement of aluminum frame packaging technology and the improvement of the manufacturing precision of automated equipment, the thickness of the coil can be only 0.12mm to 2.0mm thick. These coils, of …

Color coated aluminum coils for roofing sheets are of alloys 1050, 1060, 1100, 3003, 3004 and 3105. Although there are 6 candidate alloys, only 3003 and 3004 are the most popular. 1050, 1060 and 1100 are weaker in either hardness or corrosion resistance. They are suitable for roofing sheets expected to last only years, especially when they are coated with …

A color coated aluminum coil for constructions mainly refers to coil for curtain wallboard. Although coated aluminum rolls can also be applied to ceiling, gutter, roofing etc., these fall on the decoration scope of a house. The specification for those applications slightly varies from construction coated aluminum coil, which covers alloys of 1100, 3003, 3004 and 3005. The tempers are …

The 5052 color coated aluminium coil for Venetian blinds is of H19 temper, 0.16mm to 1.5mm thick, 12.5mm to 200mm wide and high gloss coating of PE or Acrylic acid for indoor applications and PE 2 coats for both sides for outdoor applications. The coil is very hard in H19 state, though its tensile strength is lower than that of …

Haomei coated aluminum letter edge strips roll is a special aluminum strip for channel letter products. The roll can be of 1050, 1060, 3003, 3105 or 5005 alloy. Tempers include H24, H26 and H34. The thicknesses are 0.5mm, 0.6mm, 0.8mm and 1.0mm, width 30mm to 500mm, and inner diameter 150mm, 400mm and 500mm. The surface can be coated, brushed, anodized, …

The aluminium strip rolls for ac machine condenser are of 8011, 1100 or 3102 alloy, with tempers of O, H22, H24, H26 and H18. The strip rolls are used for ac machine condensers because they have light weight, good heat exchange and excellent corrosion resistance. General thickness of the rolls ranges between 0.09mm and 0.20mm, and width 200mm to 1400mm. …