Welcome to the web of Haomei Aluminum

Aluminum Coil

» Aluminum Coil

  • Aluminum roof coil stock

    CATEGORY AND TAGS:
    Aluminum Coil, Color Coated Aluminium , ,

    Alloy: A3004H24, A3004H26, A3003H24;

    Temper: h24, h26

    Thickness: 0.6-1.2mm (0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm);

    Width: according to customer requirements, it can be slit to any width within 55mm to 1600mm;

    Color: common silver gray, bright silver, champagne silver, steel will wait thousands of colors.

    enquiry
    • Specifications
    • Classification
    • Price

    Haomei aluminum roof coil stock, usually color coated, can be of 1xxx or 3xxx series. 3003, 3004 or 3105 aluminum coil stock is commonly used for conventional roof slabs, while 1100 or 3003 is for embossed aluminum roofing coils. The regular widths for smooth-surfaced roof coils include 1000mm, 600mm and 575mm, and embossed ones from 1200mm to 1600mm. Specific width can be customized according to your requirements. The coating thickness for smooth stocks is 0.8mm or 0.88mm, but that for embossed stocks are much thicker, from 0.25mm to 0.5mm. Available paints cover pe (for embossed coils), pvdf (for smooth coils) and pvc. The color of gray, silver gray or flash silver is commonly used for conventional roofing panels that are double-coated, and the back coating is generally white; emboss aluminum roof coil rolls, with orange peel or diamond pattern, are usually black, brown or white, according to customer requirements.

    aluminium roof coil stock

    Alloy: A3004H24, A3004H26, A3003H24;

    Temper: h24, h26

    Thickness: 0.6-1.2mm (0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm);

    Width: according to customer requirements, it can be slit to any width within 55mm to 1600mm;

    Color: common silver gray, bright silver, champagne silver, steel will wait thousands of colors.

    Surface treatment steps for our aluminum roof sheet coil stocks are as below: 1) Anodized aluminum plate (usually imported, domestic technology is immature) 2) Powder spraying treatment 3) Fluorocarbon spraying treatment Anodizing VS powder vs Fluorocarbon aluminum plate curtain wall basic knowledge tutorial! Hurry up and collect! ⑦Fluorocarbon spraying process: fluorocarbon (PVDF: polyvinylidene fluoride) spraying: after aluminum sheet blanking and processing, enter the surface treatment production line. The standard procedure is: pre-degreasing → degreasing (alkali washing, strong alkali washing to remove oil stains ) → 2 water washing → pickling (deoxidizing film) → water washing → chromizing (or phosphating, passivation to form an oxide film → water washing) → 2 pure water washing → drying → strong cooling → spray primer → spray paint (Color paint) → baking → (strong cooling → spray lacquer → baking).

    Haomei aluminum roof coil stocks, with stable performances in corrosion resistance, are widely used in civil construction. Aluminum stucco roof coil stocks of aluminium-magnesium alloy generally adpot the pre-roll coating process, which has the advantages of good color difference control, uniform paint film, high quality stability, and environmental protection. The coating type is generally PVDF fluorocarbon paint with 70% or more of fluorocarbon resin.

    Self-cleaning fluorocarbon aluminium roof sheet in coil, a new product of our company, is made of imported self-cleaning fluorocarbon paint roller. Its appearance is the same as ordinary fluorocarbon aluminum coil, but the surface characteristics are very different from ordinary paint, with higher surface energy and wettability. When the fluorocarbon coating is affected by wind, frost, rain, and snow, under suitable conditions, more decontamination active ingredients will be slowly released from the inside of the coating to restore the cleanness of the surface. Therefore, this self-cleaning effect is Long-term effective.

    The range of alloy, thickness and width are the same as ordinary fluorocarbon aluminum coil; the color can be adjusted according to the customer's template. Either stucco emboss aluminum roof coil or regular roofing rolls can be made in this way.

    The heat-reflective color-coated aluminum roof sheet coil is the latest product of our company, which is used to make "cold roofingsystem". The heat-reflective fluorocarbon aluminum coil is made of imported special fluorocarbon paint roller, and the fluorocarbon content is more than 70%. The paint contains a special ceramic component, which can effectively reflect the infrared part of the sun while still retaining the absorption of visible light. Under the same color, the roofing system composed of heat-reflective fluorocarbon color-coated aluminum panels can continuously reduce the continuous operating cost of the building's air conditioning, reduce the peak energy demand, and reduce the urban heat island effect.

    How to get a price?

    Please send your requirements to email april@aluminumhm.com or whatsapp +8615838029491 and you will get a quotation soon!

    Or leave messages by "contact us".

    Enquiry Form ( we will get back you as soon as possible )

    Name:
    *
    Email:
    *
    Message:

    Verification:
    3 + 3 = ?

    Maybe you like also